In order to meet the increasing need for Raspberry Pi compatible camera modules. The Arducam team now released another add-on mini camera module for Raspberry Pi series boards which is fully compatible with the official one.
The board itself is tiny, at around 25mm x 24mm, which makes it perfect for mobile or other applications where size and image quality are important. It connects to Raspberry Pi by way of a short ribbon cable. The camera is connected to the BCM2835/BCM2836 processor on the Pi via the CSI bus, a higher bandwidth link that carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi.
The sensor itself has a native resolution of 5 megapixels and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.
It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing with cameras.
Sensor | Omnivision OV5647 sensor |
Sensor size | 1/4” (OV5647) |
Resolution | 5MP 2592×1944 |
Video | 1080p 30 fps, 720p 60fps, 480p 90fps |
Field of View (FOV) | 54°(H), 41°(V) |
Focus Type | Fixed Focus |
Focus Length | 3.60mm |
Focus Distance | 1 m to infinity |
Full-frame SLR lens equivalent | 35 mm |
Dimension | 25×24 mm |
Peak Current | 300mA |
Note for Supported Raspberry Pi Boards and OS | |||
---|---|---|---|
Platform | Bookworm(rpicam) | Bullseye(libcamera) | Buster(raspistill) |
Raspberry Pi 5 | √ | ||
Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W | √ | √ | √ |
Raspberry Pi CM3 / CM3+ / CM4 (extra carrier board required) |
√ | √ | √ |
Posted: January 4, 2021
Introduction 5MP OV5647 cameras, namely the V1 camera series, are used a lot on Raspberry Pi camera applications. Unlike the V2 cameras which are encrypted on the camera board with a chip, the 5MP OV5647 cameras can be easily modified and customized by third-party manufacturers, thus you will see a lot of variations of this […]
![]() User guide.pdf ![]() Datasheet.pdf |
Note: 3D printed camera case with Raspberry Pi for CR-10, please check HERE.
Điện tử ProE cung cấp linh kiện điện tử, thiết bị điện tử , linh kiện IoT chính hãng. ProE cung cấp dịch vụ đặt hàng linh kiện điện tử, thiết bị điện tử chính hãng theo yêu cầu cụ thể của khách hàng. Liên hệ : contact@proe.vn, SĐT: 0938946849
Website: www.proe.vn
Diễn đàn: https://www.facebook.com/groups/278263459284765/
Youtube Chanel: ProE Youtube
Facebook: ProE Facebook