BME680 Environmental Sensor

  • Mã sản phẩm: BME680 Environmental Sensor
  • Nhà sản xuất: Waveshare
  • Website hỗ trợ: https://www.proe.vn
350.000₫
PACKAGE CONTENT

Weight: 0.008 kg

  1. OPTIONS BME68X Environmental Sensor x1
  2. PH2.0 6PIN cable (~20cm) x1

1

2

BME68X Environmental Sensor, Supports Temperature / Humidity / Barometric Pressure / Gas Detection, Optional AI Function

BME68X Environmental Sensor

Supports temperature, humidity, barometric pressure and gas detection

Supports Raspberry Pi / Raspberry Pi Pico / Arduino / ESP32 ...

Version Options

Features At A Glance

  • Onboard BME68X sensor to measure temperature, humidity, barometric pressure, and gas
  • Supports I2C communication, I2C address configurable, with I2C bus cascading support
  • Supports SPI communication, enabled via CS pin (I2C bus by default)
  • Onboard voltage translator, compatible with 3.3V/5V level
  • Comes with online development resources and manual (examples for Raspberry Pi / Raspberry Pi Pico / Arduino / ESP32)

Sensor Parameters Comparison

MODEL BME280 BME680 BME688
DETECTION SUPPORT Barometric pressure, Environmental temperature, Relative humidity Barometric pressure, Environmental temperature, Relative humidity, VOC gas change detection (supports IAQ calculation in combination with the software package) Barometric pressure, Environmental temperature, Relative humidity, VOC and VSC gas change detection (supports IAQ calculation in combination with the software package, and integrated AI function)
COMMUNICATION INTERFACES I2C and SPI
TEMPERATURE SENSING RANGE -40~85°C
ACCURACY ±1.0℃ (0~65℃) ±0.5℃ (0~65℃)
HUMIDITY SENSING RANGE 0~100%RH
ACCURACY ±3%RH
BAROMETRIC PRESSURE SENSING RANGE 300~1100 hPa
ACCURACY ±1.0hPa (0~65℃) ±0.6hPa (0~65℃)
GAS SENSING - supports VOC gas change detection supports VOC and VSC gas change detection
DIMENSIONS 27 × 20mm

 

Supports I2C And SPI Interfaces Control

For Use With Controller Boards Like Raspberry Pi/Raspberry Pi Pico/ESP32/Arduino

PIN I2C SPI
CS NC SPI chip selection, low active
ADDR/MISO I2C address chip selection
high level (default) address: 0x77
Shorting onboard ADDR pad, the address is 0x76
SPI data master input/slave output
SCL/SCK I2C clock SPI clock input
SDA/MOSI I2C data SPI data master output/slave input
GND Ground
VCC 3.3V/5V power supply

 

Product Show

Outline Dimensions

Resources & Services

Wiki: www.waveshare.com/wiki/BME680_Environmental_Sensor
www.waveshare.com/wiki/BME688_Environmental_Sensor

 

Xem thêm Thu gọn

Điện tử ProE cung cấp linh kiện điện tử, thiết bị điện tử , linh kiện IoT chính hãng. ProE cung cấp dịch vụ đặt hàng linh kiện điện tử, thiết bị điện tử chính hãng theo yêu cầu cụ thể của khách hàng. Liên hệ : contact@proe.vn, SĐT: 0938946849
Website: www.proe.vn
Diễn đàn: https://www.facebook.com/groups/278263459284765/
Youtube Chanel: ProE Youtube
Facebook: ProE Facebook

Sản phẩm vừa xem

popup

Số lượng:

Tổng tiền:

Giỏ hàng( Sản phẩm)

0938946849