OpenCR1.0 OpenCM
- Mã sản phẩm: OpenCR1.0 OpenCM
- Nhà sản xuất: Robotis
- Website hỗ trợ: https://www.proe.vn
5.900.000₫
Features
OpenCR1.0 (Open-source Control module for ROS) is an open source robot controller embedded with a powerful MCU from the ARM Cortex-M7 line-up.
The hardware, software, schematics, PCB Gerber, BOM, and firmware source codes of the OpenCR1.0,
the main controller used in the official ROS education platform TurtleBot3, are accessible and open to the public.
Supports RS-485 and TTL to control the Dynamixels, and offers UART, CAN and a variety of other communication environment, development tools such as Arduino IDE are available as well.
It has the advantage of being able to operate more powerfully when used with a host controller such as SBC (Single Board Computer).
It provides various exclusive sources based on ROS, so that you can maximize the functions of OpenCR1.0 when using ROS.
Package Components
| OpenCR1.0 | 1 |
|---|---|
| USB Micro B Cable | 1 |
H/W Specifications
| Microcontroller | STM32F746ZGT6 / 32-bit ARM Cortex®-M7 with FPU (216MHz, 462DMIPS) |
|---|---|
| Sensors | Gyroscope 3Axis, Accelerometer 3Axis, Magnetometer 3Axis (MPU9250) |
| Programmer | ARM Cortex 10pin JTAG/SWD connector USB Device Firmware Upgrade (DFU) Serial |
| Extension pins | 32 pins (L 14, R 18) *Arduino connectivity Sensor module x 4 pins Extension connector x 18 pins |
| Communication circuits | USB (Micro-B USB connector/USB 2.0/Host/Peripheral/OTG) TTL (B3B-EH-A / Dynamixel) RS485 (B4B-EH-A / Dynamixel) UART x 2 (20010WS-04) CAN (20010WS-04) |
| LEDs and buttons | LD2 (red/green) : USB communication User LED x 4 : LD3 (red), LD4 (green), LD5 (blue) User button x 2 |
| Powers | External input source 5 V (USB VBUS), 7-24 V (Battery or SMPS) Default battery : LI-PO 11.1V 1,800mAh 19.98Wh Default SMPS : 12V 5A External output source 12V@1A(SMW250-02), 5V@4A(5267-02A), 3.3V@800mA(20010WS-02) External battery Port for RTC (Real Time Clock) (Molex 53047-0210) Power LED: LD1 (red, 3.3 V power on) Reset button x 1 (for power reset of board) Power on/off switch x 1 |
| Dimensions | 105(W) X 75(D) mm |
| Mass | 60g |
Diagram
Compatible Products
DYNAMIXEL X-Series
DYNAMIXEL AX/MX Series (Requires Molex-JST convertible cable)
DYNAMIXEL P-Series (Requires Molex-JST convertible cable)
Robotis Sensor Products
Links
Điện tử ProE cung cấp linh kiện điện tử, thiết bị điện tử , linh kiện IoT chính hãng. ProE cung cấp dịch vụ đặt hàng linh kiện điện tử, thiết bị điện tử chính hãng theo yêu cầu cụ thể của khách hàng. Liên hệ : contact@proe.vn, SĐT: 0938946849
Website: www.proe.vn
Diễn đàn: https://www.facebook.com/groups/278263459284765/
Youtube Chanel: ProE Youtube
Facebook: ProE Facebook
Sản phẩm cùng loại
Digital Hall Sensor SEN0185
400.000₫
DRV8889-Q1EVM
4.400.000₫
General Driver for Robots
850.000₫
DC Driver MSDI1
1.350.000₫
MSD_EM DC Servo Driver
750.000₫
