This Arducam IMX219 fisheye lens camera module is designed mainly for Raspberry Pi V2 camera board and Nvidia Jetson Nano, replacing the default standard IMX219 camera module to get a much wide field of view. It can be used for drones, robots, action cameras, and 3D scanning applications.
Sensor | Sony IMX219 |
Optical Format | Type 1/4(Diagonal 4.60mm) |
Pixel | 8MP |
Pixel Size | 1.12μm×1.12μm |
Active Pixels | 3280 (H) × 2464 (V) |
CSI-2 Data Output | 2-lane mode |
Output Format | Raw8/Raw10 |
Frame Rates | 30fps@8MP, 60fps@1080p, 180fps@720p |
Shutter Type | Rolling Shutter |
Focus Type | Manual |
Lens specs | EFL: 2.5mm, F.NO: 2.8 |
FOV(Field of View) | 155°(H), 115°(V), 175°(D) |
IR Sensitivity | Integral IR Filter, visible light only |
Peak Current | 300mA |
Used on Pi
Posted: January 6, 2021
Introduction Arducam team just released an 8MP Raspberry Pi compatible camera based on the same Sony IMX219 image sensor. It’s capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 Read more…
Used on Jetson
Posted: August 6, 2020
Introduction IMX219 is a 1/4″ 8MP MIPI CSI-2 image sensor, it was adopted by the Raspberry pi V2 camera module back in 2016. Now the IMX219 camera is natively supported by the Jetson Nano and Read more…
Điện tử ProE cung cấp linh kiện điện tử, thiết bị điện tử , linh kiện IoT chính hãng. ProE cung cấp dịch vụ đặt hàng linh kiện điện tử, thiết bị điện tử chính hãng theo yêu cầu cụ thể của khách hàng. Liên hệ : contact@proe.vn, SĐT: 0938946849
Website: www.proe.vn
Diễn đàn: https://www.facebook.com/groups/278263459284765/
Youtube Chanel: ProE Youtube
Facebook: ProE Facebook