Raspberry Pi Compute Module 5 IO Board With PoE Feature, For All Variants Of CM5

Package Content

Weight: 0.148 kg

CM5-PoE-BASE-A

1. CM5-PoE-BASE-A x1
2. Screws pack x1

1

2

CM5-POE-BOX-A

1. Metal case (top and bottom) x1
2. CM5-PoE-BASE-A x1
3. CM4-IO-BOARD-CASE-A-ADAPTER x1
4. CM5-FAN-4010-5V x1
5. OPTIONS 27W USB-C power supply x1
6. Screwdriver x1
7. Antenna connector rubber plug x1
8. Button cap x1
9. Screws pack x1

Raspberry Pi Compute Module 5 IO Board with PoE Feature, for all Variants of CM5

Compute Module 5 PoE Base Board

suitable for evaluating the Raspberry Pi CM5 or being integrated into end products

PoE Base Board for all Compute Module 5 Variants

Version Options

PoE Base Board
the base board only

PoE Mini-Computer Kit
PoE Base Board + metal case + power supply adapter

Specifications

Connecting with Compute Module 5

standard CM5 socket and Raspberry Pi 40PIN GPIO header
suitable for all variants of Compute Module 5

Power Over Ethernet

providing both network connection and power supply for your Raspberry Pi in one cable

Supports M.2 NVMe Solid State Drive

Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, support booting Raspberry Pi from NVMe Solid State Drive

* for reference only, please refer to the Package Content for detailed part list

Compatible with multiple sizes

NVMe Drive Slot Support

Note: Only supports the NVMe Protocol Solid State Drives.

Rich peripheral connectors

onboard connectors including MIPI / M.2 / HDMI / USB / ETH / TF Card Slot

Precise cut-out with clear label

each cut-out is completely aligned with the connector

Cooling fan included

comes with cooling fan, combined with the airflow vent, better heat dissipation

Wall mount support

wall mount holes on two sides, handy for mounting

Application examples

Ideal for Raspberry Pi applications with multiple peripheral requirements, or other industrial context

* for reference only, please refer to the Package Content for detailed part list

What's On Board

1. CM5 socket
   Suitable for all variants of Compute Module 5
2. USB Type-C power supply / programming
   5V/5A power supply, also allows burning system image into Compute Module 5 variants
3. M.2 Solid State Drive indicator
   Keeps blinking while reading/writing
4. M.2 M key
   Compatible with 2280/2260/2242/2230 NVMe drives or AI accelerator module
5. Dual MIPI interfaces
   for connecting DSI LCDs or CSI cameras
6. PSW button
   power button
7. 40PIN GPIO header
   for connecting various HATs
8. RTC battery holder
   Supports CR/ML2032 button cell
9. HDMI ports
   2x HDMI ports, supports dual 4K output
10. Status indicators
    ACT: Raspberry Pi operating status indicator
    PWR: Raspberry Pi power indicator

11. USB2.0 ports
    2x USB2.0 ports, for connecting sorts of USB devices
12. USB 3.2 Gen1 ports
    2x USB 3.2 Gen1 high-speed ports, supports 5Gbps synchronous operation
13. Gigabit Ethernet connector
    Gigabit Ethernet RJ45 with PoE support
14. FAN connector
    for connecting cooling fan
15. Misc configurations
    for extending other functions
16. IO-VREF/PoE selection
    CM5 IO logic level: 3.3V or 1.8V
    PoE: enable (EN) or disable (DIS)
17. CAM1 and DISP1 I2C bus
    fit the jumpers when using CAM1 or DISP1
18. TF card slot (bottom side)
    insert a TF card with pre-burnt system, to start up Compute Module 5 Lite

Outline dimensions

PoE Base Board

PoE Mini-Computer Kit

Resources & Services

WIKI: www.waveshare.com/wiki/CM5_PoE_BASE_A