SIM7600G-H 4G HAT (B) for Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support, GNSS Positioning, Global Band

PACKAGE CONTENT

Weight: 0.162 kg

1. SIM7600G-H 4G HAT (B) x1
2. LTE Antenna x1
3. GPS Antenna x1
4. USB-A to micro-B cable x1
5. Screws pack x1

1

2

3

4

5

SIM7600G-H 4G HAT (B) For Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support, GNSS Positioning, Global Band

4G HAT FOR RASPBERRY PI

Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning

Based on SIM7600G-H, Global Band

Features At A Glance

• Connected via pogo pin or MicroUSB connector
  • Dedicated pogo pin for Raspberry Pi Zero/Zero W
  • MicroUSB connector for other Raspberry Pi boards or PC
• Incorporates SIM7600G-H global band 4G module, compatible with 2G/3G/4G network with global support
• USB HUB connector for other Raspberry Pi boards or PC, providing USB extension and 4G network access
• Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
• Supports GPS, BeiDou, Glonass, LBS base station positioning
• SIM card slot, supports 1.8V/3V SIM card
• Onboard audio jack and audio decoder for making telephone call
• 2x LED indicators, easy to monitor the operating status
• Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
• Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
• Comes with development resources and manual (examples for Raspberry Pi)

Specifications

Suitable For Raspberry Pi / PC

Dedicated Pogo Pin For Connecting With Raspberry Pi Zero/Zero W Without Extra USB Cable
General Purpose MicroUSB Connector For Other Raspberry Pi Boards Or PC

Global Band 4G / 3G / 2G Support

Up To 50Mbps Uplink And 150Mbps Downlink For 4G Network *

* stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc.

USB HUB Feature

Onboard USB HUB Chip With USB2.0/1.1 Compliant,
Providing 2x USB-A Connector And 1x USB Solder Pad

GNSS Positioning

Supports GPS, BeiDou, Glonass, LBS Base Station Positioning

Telephoto Call & SMS Support

Making Telephoto Call Or Sending SMS By AT Commands, With Onboard Audio Jack

Application Example

What's On Board

1. SIM7600G-H
2. FE1.1S USB HUB chip
3. NAU8810 audio decoder
4. MP1482 power chip
5. RT9193-33 voltage translator
6. USB HUB input
   D+/D- pogo pin: for Raspberry Pi Zero/Zero W
   MicroUSB connector: for other Raspberry Pi boards or PC
7. Pogo pin power supply
   5V: connects to 5V pin of Zero/Zero W, up to 2A current
   GND: connects to GND pin of Zero/Zero W

8. USB extended ports
   USB1~USB2: USB-A connectors
   USB3: solder pad
9. SIM card slot
   supports 1.8V/3V SIM card
10. 3.5mm earphone/mic jack
11. MAIN antenna connector
12. AUX auxiliary antenna connector
13. GNSS antenna connector
14. Power indicator
15. Network status indicator

Outline Dimensions

Resources & Services

WIKI: SIM7600G-H_4G_HAT_(B)